Equipment for your business success

Cable cutting machine «TR-200» три ножа

A cable cutting machine «TR-200» is the most powerful of the line

  • Three drive shafts
  • Easy reconfiguration less than 1 min
  • Choppers diameter - 200 mm
  • It is possible to chop from 3 sides at the same time
  • Unit power 4.5 kW
  • Calculated diameter of a processed cable - from 10 mm to 150 mm

Machine for cable cutting «TR-200» -main technical characteristics:

Power supply for a cable cutting machine «TR-200» with three choppers
Supply voltage: 380 Volts (alternating current, 3 phases)
Power of a cable cutting machine «TR-200» with three choppers
4.5 kW
Electric engines power: 3 х 1,5 kW = 4.5 kW
Diameter of a cable for a cable cutting machine «TR-200»
cable max.
Ø 150mm
Calculated diameter of processed cable - from 5 mm to 150 mm
Cutting speed of a cable cutting machine «TR-200»
𝝊 = 434 mm/sec
Cutting speed: 434 мм/сек
Cutting force of a cable cutting machine «TR-200»
F = 2000 kgF
Max cutting force (calculated): 2000 kgF (2 tons)
Operator for cable cutting machine«TR-200» with three choppers
x 1
Machine service: min 1 person (operator)
Weight of a cable cutting machine «TR-200» with three choppers:
m = 325 kg
Size of machine (W x L x H): 90 х 120 х 180 см
Machine weight: 325 kg

Details of Cable cutting machines «TR-200»

Electric engines.. Geared motors with a power of 1.5 kW are used for a cable cutting machine «TR-200». Total unit power is 4.5 kW. Machine supply: 380 Volts. Max calculated force on the edge of 1 chopper is 2450 N, total rotational moment of a unit is 735 N*m, total max cutting force - 7,35 kN.

Knives for cable cutting machine. Choppers diameter is 200 mm. Our knives are ideal. Chopper is the most important detail in this kind of equipment. Choppers of a machine «TR-200» can not be installed on other models.

Cable cutting machines «TR-200» has choppers with a diameter of 200 mm, there is no need in extra nozzles. Expanded diameter of choppers allows to significantly easier process cables with the broadest cover. The less the angle of cable input into the chopper is (the angle between tangent to the chopper edge and central axis of a cable), the easier it is to cut a broad cover.

Our choppers can cut any strap steel armour, lead, aluminium, copper, any type of covering and shield.

Our choppers do not break, are not chipped and even do not get blunt, if they are used for intended purpose - for cable and cable armour cutting.

As necessary, choppers are always available.

We use only roller bearings for shafts installation.Roller bearings are significantly more sensitive to radial loads, more durable, they are not afraid of calculating curve while working. Taking into account that they work 10 % of their max load, more likely that it will not be necessary to change them during the whole period of a machine life. For example, roller bearings installed in the place of workload application have lifting capacity of 99000N, what corresponds to 10 tons of load.

Places of max load application with tenfold effort supply are found and tested by long experience. Force of a working part can reach 2000 kg-force (theoretically speaking, you can hung a load of 2000 kg on a working part of a shaft, and it will work).

Six locking pins for fixation of moving shafts with a diameter of 20 mm are made of hardened high-strength steel. Strength of force pins corresponds to the max meaning of 12 (according to State standard 1759.4-87).

Full-bodied nuts made of structural carbon steel provide reliable fixing of bearing structures. There are not any shafts movements or vibration during work of cable cutting machine «TR-200». Neither block, nor shafts bend even under max load.Tested. Reliable!

Unique construction of precise choppers joining into one point by one handle with a reverse counterbalance is elaborated by our engineers specially for a cable cutting machine «TR-150» and «TR-200». We use only high-quality structural steel with a width of 10-20 mm. Weld is produced on conductors of high precision. Bearing construction provides strict linear movement of shafts (regulation of work clearance). Strength of fixing of all shafts and accuracy and comfort of setting depend on quality of this construction.

Bronze nuts (with trapezoidal thread) of main carriage movement screw with working shaft vertically in conjunction with 2 block rolling bearing provide smooth assured movement of screw and possibility of precise adjustment. We do not save on quality. We use trapezoidal thread for elements of linear movement according to machine-building standards. Screw head of expanded diameter and comfortable polished handle are set on a cable cutting machine «TR-200».

High-quality electrics in our cable cutting machine «TR-200» with a separate starter for every electric engine and separate thermal switch preventing overload for every electric engine, with «Stop» button and flag of emergency stop (optionally).

We do not save on quality of electrics and electronics. In this machine a cable can not be seized so there is no need in reverse switch.

Basic set of a cable cutting machine «TR-200»

A cable cutting machine «TR-200» is delivered in assembled form, fully set and ready for work.

1 piece
Plug for supply connection
1 piece
1 piece
Manual on setting
1 piece

Warranty for a cable cutting machine «TR-200»

Warranty lifetime of a machine is 12 months. Warranty applies to

  • load-carry part of a machine: welded steel elements
  • electronic part
  • electric engines

Mechanical damages are not warranty cases

Price for a cable cutting machine


Believe us, if we could make this equipment cheaper with the same quality, we would do that. We calculated. We tried.
It is impossible to make this machine cheaper qualitatively.

Every cent in this amount for our stripper is justified.

Available now: many

Price in rubles: show the price
Order now

Economic justification

Download pdf

If you have any questions, leave your contacts and we will answer them

Or call us
+7 (812) 926 46 00

Cable cutting machine «TR-200» три ножа

We do not resell – we do produce!


We do not only produce equipment —
We use it ourselves!

You do not buy a pig in a poke - visit our production site and see how we work with the material.

Mature technology of all cables cutting and processing - bring your cable, we will configure a cable cutting machine with you and will dismantle your samples.

In basic package there is a set of nozzles for dismantling of cables with diameter from 1 to 150mm; set of nozzles for effective work with 2 choppers at the same time

Refined, mature and tested through the years construction

Delivery in the Russian Federation, to the states of the CIS and the EU

Equipment shipment from production site in St. Petersburg (the Russian Federation).

We cooperate with all transport company as you wish

If you have questions, call us!
+7 (812) 926 46 00